 |
|
|
|
|
|
|
|
|
|
 |
|
||||||||
 |
 |
 |
 |
 |
 |
 |
|
||
 |
 |
 |
 |
 |
 |
|
|||
 |
 |
 |
 |
|
|||||
 |
 |
 |
 |
|
|||||
 |
 |
 |
 |
|
|||||
DAY 2 & 3
|
|
| Phenonlics with the balsa caps on the ends to keep glue from getting in the tube | .jpg) |
| Phenolics for the tail | .jpg) |
| Foam with the hole cut in it for the servo wires and phenolic installed | .jpg) |
| Sheeting with the glue on the back ready to be put on the foam |  |
| Sheeting laid on the flat and level pool table waiting (this is a shot after they were already dry and the weight was removed) | .jpg) |
| Wings on the pool table | .jpg) |
| Wing shot after the sheeting is dry and the skins have been sanded flush to the foam. | .jpg) |
| Trailing edge shot of the wing after sanding | .jpg) |
| Pics of the wings and tail after the sheeting was sanded flush to the foam ready for the leading and trailing edges to be cut and installed | .jpg) |
Leading edges installed |
.jpg) |
| (elevator) | .jpg) |